Basic functions
Basic functions of the ACS basic models
- - central parametric operator interface
- - processing of solid material is possible within the weight limits
- - simultaneous production of 3 different workpiece lengths is possible. Discharge of 2nd and 3rd work piece length can be directed to the rear of the machine or through the chip conveyor.
- - data management of all workpiece related parameters, approx. 10,000 different workpieces
- - storage of each individual workpiece processed, measured values etc., approx. 50,000,000 pieces
- - material lead edge detection (light sensor)
- - detection of the end of the material (light sensor), scrap end length sensor
- - automatic adjustment of workpiece length and temperature compensation with existing length measuring device
- - saw blade / saw drive monitoring
- - minimum torque
- - maximum torque
- - operating limits of saw torque (preset parameters via operator panel)
- - operating limits workpiece counter (preset parameters via operator panel)
- - operating limits cutting area (preset parameters via operator panel)
- - operating limits saw blade temperature (optional) (preset parameters via operator panel)
- - tool break monitoring
- - crash monitoring with logging
- - quick return of saw blade (10ms) in case of crash, emergency stop or power failure
- - vibration monitoring, operating limits vibration
- - calculation and display of critical cutting speed for applicable saw blade
- - rejection of 1st workpiece after incomplete saw cut, for example after emergency stop or crash
- - monitoring of clamping device of the grip feeder, including position measuring system
- - monitoring of minimum clamping force (preset parameters via operator panel)
- - monitoring of maximum clamping force (preset parameters via operator panel)
- - continuous clamping force adjustment (preset parameters via operator panel)
- - rejection of workpiece upon machine fault
- - monitoring of clamping device of the saw, including position measuring system
- - monitoring of minimum clamping force (preset parameters via operator panel)
- - monitoring of maximum clamping force (preset parameters via operator panel)
- - continuous clamping force adjustment (preset parameters via operator panel)
ACS102 Sawing
Single cut
with a tool clamping range of 10 mm
from Ø 10 mm to Ø 120 mm, profile 10x10 - 100x100 mm, 120x62 mm
Double cut
with a tool clamping range of 5 mm
from Ø 10 mm to Ø 45 mm
Triple cut
with a tool clamping range of 5 mm
from Ø 14 mm to Ø 31.5 mm
Quadruple cut
with a tool clamping range of 2 mm
from Ø 10 to Ø 14 mm
possible combinations for ACS102
ACS102... → Container
Please note: no further combinations are possible with this basic model.