Basic functions
Basic functions of the ACS basic models
- - central parametric operator interface
- - processing of solid material is possible within the weight limits
- - simultaneous production of 3 different workpiece lengths is possible. Discharge of 2nd and 3rd work piece length can be directed to the rear of the machine or through the chip conveyor.
- - data management of all workpiece related parameters, approx. 10,000 different workpieces
- - storage of each individual workpiece processed, measured values etc., approx. 50,000,000 pieces
- - material lead edge detection (light sensor)
- - detection of the end of the material (light sensor), scrap end length sensor
- - automatic adjustment of workpiece length and temperature compensation with existing length measuring device
- - saw blade / saw drive monitoring
- - minimum torque
- - maximum torque
- - operating limits of saw torque (preset parameters via operator panel)
- - operating limits workpiece counter (preset parameters via operator panel)
- - operating limits cutting area (preset parameters via operator panel)
- - operating limits saw blade temperature (optional) (preset parameters via operator panel)
- - tool break monitoring
- - crash monitoring with logging
- - quick return of saw blade (10ms) in case of crash, emergency stop or power failure
- - vibration monitoring, operating limits vibration
- - calculation and display of critical cutting speed for applicable saw blade
- - rejection of 1st workpiece after incomplete saw cut, for example after emergency stop or crash
- - monitoring of clamping device of the grip feeder, including position measuring system
- - monitoring of minimum clamping force (preset parameters via operator panel)
- - monitoring of maximum clamping force (preset parameters via operator panel)
- - continuous clamping force adjustment (preset parameters via operator panel)
- - rejection of workpiece upon machine fault
- - monitoring of clamping device of the saw, including position measuring system
- - monitoring of minimum clamping force (preset parameters via operator panel)
- - monitoring of maximum clamping force (preset parameters via operator panel)
- - continuous clamping force adjustment (preset parameters via operator panel)
Basic functions for all ACS basic models with BDM
- - automatic length adjustment
- - parametric presetting of engagement depth of roller brushes, modification during automatic mode is possible
- - NC transport disc system, parametric presetting of the transport angle of the compartment in the transport disc, 6 transport discs, secure workpieces while they are rotated 360° during brushing procedure, even with profile material
- - transport function for round material, quadruple cut, double cut, profile material
- - transport function for austenitic stainless steels, multiple deburring including automatic, variable engagement depth of roller brushes during deburring procedure
- - continuous adjustment of brush rotational settings
- - power monitoring of brush drives
- - chip blow before brush-deburring, selectable chip blow methods
Basic functions for all ACS basic models with CFM
- - monitoring of chamfering tools
- - torque limit with quick return 10 ms
- - operating limits of minimum torque (preset parameters via operator panel)
- - operating limits of maximum torque (preset parameters via operator panel)
- - operating limits workpiece counter (preset parameters via operator panel)
- - operating limits cutting area (preset parameters via operator panel)
- - tool break monitoring
- - crash monitoring
- - quick return of saw blade (10 ms) in case of crash, emergency stop or power failure
- - material center adjustment based on chamfering torque
- - rejection of workpieces outside operating limits
- - monitoring of clamping device for chamfering, including position measuring system (left/right)
- - monitoring of minimum clamping force (preset parameters via operator panel)
- - monitoring of maximum clamping force (preset parameters via operator panel)
- - continuous clamping force adjustment (preset parameters via operator panel)
- - chip blow before chamfering, blowing out with rotations
- - chip blow after chamfering
ACS102...+CFM+BDM Sawing+Chamfering+Brush-deburring
ACS102...+CFMcurve+BDM Sawing+Chamfering / curve-machining+Brush-deburring
Single cut
with a tool clamping range of 5 mm
from Ø 10 to 105 mm
for workpiece lengths ≥ 100 mm
Single cut only without chamfering
profile 10x10 - 74x74 mm, 100x40 mm,
for workpiece lenghts ≥ 100 mm
profile 74x74 - 80x80 mm, 100x60 mm possible,
for workpiece lengths ≥ 100 mm,
cannot be rejected during lengths measuring,
machine will stop automatically in case of faulty length
Double cut only without chamfering
with a tool clamping range of 5 mm
from Ø 10 to 31,5 mm
for workpiece lengths ≥ 100 mm
possible combinations for
ACS102...+CFM+BDM,
ACS102...+CFMcurve+BDM
→ Container
→ +SCB → Container
→ +SCB +WDM → Container
→ +SCB +WDM (+TI)* +SRT (+CC)* → Container
→ +WDM → Container
→ +WDM (+TI)* +SRT (+CC)* → Container
→ (+TI)* +SRT (+CC)* → Container
*(...) optional