Power requirements for ACS basic models, without WDM
Trafo 3pha.
3x400V 3x460V prim. 575V//
50 Hz 60 Hz sec. 460V 60Hz
ACS102...+BDM 60 kVAapprox. 100 Aapprox. 77 A82 A // 103 A
Compressed air requirements
ACS102...+BDM approx. 3.5 - 4 m³/min
Comment:
The compressed air consumption may be altered via operator adjustments, for ex. some blowers may not be required.
Operating supplies
Washing agents for WDM
It is not possible to provide detailed information as customers have a wide range of applications.
We use, for example, a ratio of 7% Wedolit K911/Wedolit K102 : 93% water. This corresponds to 100 liters of K911 for one WDM filling (1,400 liters capacity for workpiece length of 2,000 mm). Depending on application this filling lasts 1 to 6 months.
Water consumption of WDM approx. 10 - 100 l/day depending on application
Initial equipment
The following operating supplies are required for the base machine:
PLANTO HYD 46 S Fuchs Europe Schmierstoffe GmbH phone: +49 621 37 01-0
- clamping devices for grip feeder, saw clamp and valve blocks; 3.0 l capacity
The use of alternative products is possible in consultation with Rattunde & Co GmbH.
WEDOLIT N52 NCOC phone: (248) 548-5950
- for micro-spray lubrication; a tank of 30 l capacity
The use of alternative products is possible in consultation with Rattunde & Co GmbH.
WEDOLIT K88 NCOC phone: (248) 548-5950
WEDOLIT K102
- for micro-spray lubrication; a tank 7% / 93% distilled water; 30 l capacity
The use of alternative products is possible in consultation with Rattunde & Co GmbH.
Microlube GL 261 Klueber North America phone: (603) 647-4104
- Central lubricating system for ball screws and linear rolling guides and for the
clamping devices; 3 kg capacity
The use of alternative products is not possible; this voids any claims under the guarantee.
MOLYCOTE DX Dow Corning GmbH Wiesbaden phone: +49 611 237 1
- grease gun for BM bundle loading magazine height adjustment
The use of alternative products is not possible; this voids any claims under the guarantee.
SYNTHESO D 220 EP Klueber North America phone: (603) 647-4104
- saw gear box, 10 l capacity
The change of the oil is only necessary after 2 years or 10.000.000 pieces.
The use of alternative products is not possible; this voids any claims under the guarantee.